Welch27 Posted July 20, 2020 Share Posted July 20, 2020 (edited) I recently attempted to replace the sway bar bushings on my MKZ, while very difficult I was able to get the passenger side done. This took a couple hours due to no room in there to get a wrench or ratchet to turn with any leverage. It was a very slow removal of the nut. I went over to take care of the driver side and there is some sort of metal bracket that I cannot identify but it will not allow me to get any sort of tool in there to get this done. I looked up the cost of this online and it was quoted at 1 hour. I believe that I must be missing something, is there a special tool or something I need to remove to allow for better access to the nuts that I need to remove to get the bracket off? Thanks all for the help. Edited July 21, 2020 by Welch27 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.