MKZMark Posted November 3, 2017 Share Posted November 3, 2017 Hi all, does anyone know how long the 12V power outlets stay on after shutting the car off? After it sits overnight they are off, but they seem to stay on for quite a while. I use a dash cam and they work best with a switched outlet. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
drolds1 Posted November 3, 2017 Share Posted November 3, 2017 (edited) The owner's manual seems to indicate that they're always powered, which has been my experience: Note: Do not hang any accessory from the accessory plug. Note: Do not use the power point over the vehicle capacity of 12 volt DC 180 watts or a fuse may blow. Note: Always keep the power point caps closed when not in use. Do not insert objects other than an accessory plug into the power point. This damages the power point and may blow the fuse. Run the vehicle for full capacity use of the power point.To prevent the battery from running out of charge:Do not use the power point longer than necessary when the vehicle is not running. Do not leave devices plugged in overnight or when you park your vehicle for extended periods. Edited November 3, 2017 by drolds1 Quote Link to comment Share on other sites More sharing options...
crushalot Posted November 3, 2017 Share Posted November 3, 2017 If it is the same as the Fusion, then it seems the default is 1 hour 15 minutes as you can set it to a few different values with FORScan. https://docs.google.com/spreadsheets/d/1yax6zfhZYj2joBczEeruqKh9X5Qhee3C0ngilqwTA7E/pubhtml?gid=0&single=true I would have to pull the bit from FORScan to see what the default for the MKZ is. Quote Link to comment Share on other sites More sharing options...
MKZMark Posted November 3, 2017 Author Share Posted November 3, 2017 If it is the same as the Fusion, then it seems the default is 1 hour 15 minutes as you can set it to a few different values with FORScan. https://docs.google.com/spreadsheets/d/1yax6zfhZYj2joBczEeruqKh9X5Qhee3C0ngilqwTA7E/pubhtml?gid=0&single=true I would have to pull the bit from FORScan to see what the default for the MKZ is. Thanks, that seems about right. The dashcam has a setting to automatically shut down if there is no motion so I'll just use that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.